71 plymouth scamp - none yet hopefully low 11's - CI: 416

71 scamp · Joined: 12 Nov 2005 Posts: 1

Owner Information

Home Town: martinsburg,wv
Primary Use: street/strip
Estimated Investment: 15,000 when finished
% of Wrenching by Owner: 90%

Basic Car Information

Year: 71
Make: plymouth
Model: scamp
Weight: 3300 estimated

Proven Performance Information

Best ET/MPH: none yet hopefully low 11's
Best 60´: none yet
Performance Rating (5 is best): 5
Street Manners Rating (5 is best): 5

Gearhead Information

Engine CI: 416 stroker
Bore: 30 over
Stroke: 4.00
Block: 71 340 block
Heads: edelbrock rpm
Ported? (With flow numbers): cleaned up ports
Crank: forged steel
Rods: eagle h beam
Pistons & Rings: ross
Cam & Lifters: comp cam 267/274@.050 .570 solid flat tappet
Intake: victor 340
Distributor/Ignition: mopar electronic
Headers: tti step headers
Tran & Brake: 904 no trans break
Converter: 4500stall
Rear End Gear: 4.30
Tire Size: 28''
HP/TQ Number: dont know yet
Power Adder: none
Compression & Fuel Used: 12to1
Chassis Tricks: frame connecters/race shocks
Carb: 950 holley

Proof

Special Notes

Advice Needed

I would like from guys with experience how this combo sounds, and what et and hp/tq you guys think i could have? Thanks. Brett

juan w · Joined: 01 Aug 2005 Posts: 14

this is my friends car it has almost the same engine and trans combo that you are going to build, his best e.t. is 10.68.

http://www.youtube.com/watch?v=91ud9RlUrt0
http://www.youtube.com/watch?v=T_KOrXZbwds

_________________
81 malibu,406sbc,canfield 200,11.40cr,alky injected,roller cam 260/270@.050 626/626 lift,th350,4.27 gears,28x9 slick. best 10.68
http://youtube.com/watch?v=Scm1-sGG8MM

juan w · Joined: 01 Aug 2005 Posts: 14

these are his compadre cars the purple rans 10.02 with a 416 too.

_________________
81 malibu,406sbc,canfield 200,11.40cr,alky injected,roller cam 260/270@.050 626/626 lift,th350,4.27 gears,28x9 slick. best 10.68
http://youtube.com/watch?v=Scm1-sGG8MM